SCC Self Contained Controller

$843.00$1,904.00

Clear

SCC Self Contained Controller combines toxic and/or combustible gas detection available in one of two channel configurations.  Used for integral and remote monitoring of Carbon Monoxide (CO), Nitrogen Dioxide (NO2), Hydrogen (H2), Propane (C3H8) or Methane (CH4).  Optional Splash Guard available.

Key Features

  • Single or dual channel operation
  • Flexible internal and/or remote sensor configurations
  • LED indicators for Power, Ch1, CH2 and Fault
  • Two dry contact relays, 5-amps @240 volts each
  • One configurable 4-20 mA input
  • Line Voltage (90-240 VAC) or Low Voltage (24 VAC/VDC)
  • Internal audible alarm
  • Standard water / dust tight, corrosion resistant enclosure (drip proof); IP54 rated with water tight, door mounted audible alarm installed

Type A – Single Channel Internal Co or NO2 Sensor

Type B – Single Channel With One ESH-A Remote Sensor

Type C – Single Channel (No Internal Sensor) + Remote LPT Transmitter

Type D – Dual Channel With One Internal CO or NO2 Sensor + One ESH-A Remote Sensor

Type E – Dual Channel With One Internal CO or NO2 Sensor + Remote LPT Transmitter

Type F – Dual Channel SCC With INternal CO and NO2 Sensor

Description

SCC Manual

SCC Data Sheet

SCC Self Contained Controller

The SCC Self Contained Controller is available in one or two channel configurations for monitoring toxic and/or combustible gas types by means of an internal electrochemical Carbon monoxide (CO) or Nitrogen dioxide (NO2) sensor and one of three ESH-A remote catalytic combustible sensors used to detect Hydrogen (H2), Propane (C3H8) or Methane (CH4). Monitoring of CO or NO2 may also be achieved remotely by combining the SCC with a 4-20 mA transmitter such as the LPT-TCO or LPT-END.

The SCC also features two alarm level line voltage relays with field configurable time delays and trigger levels, a field selectable internal audible alarm and an LED panel indicating power, channel alarm status and fault conditions.

Automated calibration and other maintenance procedures are simple and easily performed in the field, and our proprietary Calibration Extending Firmware (CEF) takes into account the aging of the toxic gas sensors so that less frequent calibrations are required in less-critical applications such as parking garages.

Additional information

Weight 2 lbs
Dimensions N/A
Options

TYPE A – Internal Carbon Monoxide (CO) Sensor (0-200 ppm), TYPE A – Internal Nitrogen Dioxide (NO2) Sensor (0-10 ppm), TYPE B – Uses Remote ESH-A Remote Sensor (Order Separately), TYPE C – Remote Carbon Monoxide (CO) 4-20mA Transmitter (0-200 ppm), TYPE C – Remote Nitrogen Dioxide (NO2) 4-20mA Transmitter (0-10 ppm), TYPE D – Internal Carbon Monoxide (CO) Sensor (0-200 ppm) + Remote ESH-A Sensor (Order Separately), TYPE D – Internal Nitrogen Dioxide (NO2) Sensor (0-10 ppm) + Remote ESH-A Sensor (Order Separately), TYPE E – Internal Carbon Monoxide (CO) Sensor (0-200 ppm) + Remote 4-20mA Transmitter (Order Separately), TYPE E – Internal Nitrogen Dioxide (NO2) Sensor (0-10 ppm) + Remote 4-20mA Transmitter (Order Separately), Type F – Internal Carbon Monoxide (CO) Sensor (0-200 ppm) + Internal Nitrogen Dioxide (NO2) Sensor (0-10 ppm)